Hisun Motors VECTOR 500, Owner'S Manual, Page: 41 / 67

PERIODIC SERVICE 11-6
①
joint boot
②
Drive shaft
① Joint boot ② Drive shaft
■
Checking tire inflation pressure
Though the tire pressure is factory-set to the
prescribed level, it naturally drops slowly in the
course of time, thus check it every day and inflate
as necessary.
tire sizes inflation pressure
Front & Rear: 26x10-12 70kPa (0.7kgf/cm2, 10psi)
EVERY 50 HOURS
■
Greasing
Apply a small amount of multi-purpose grease to
the following points every 50 hours. If you operated
the vehicle in extremely wet and muddy conditions
lubricate grease fittings more often.
① Parking brake pedal
② Parking brake pivot(spray type grease)
①
Range gear shift lever pivot (spray type grease )
■
Checking engine start system
CAUTION
TO avoid personal injury

Do not allow anyone near the vehicle while
testing.

If the vehicle does not pass the test, do not
operate the vehicle.