Hisense HS312, User Manual, Page: 5 / 77

9
1
2
944 mm / 37.1”
3
4
A B
Placement and Mounting
Placement
A If your TV is placed on a table, you can place
the unit on the table directly in front of the TV
stand, centered with the TV screen.
B If your TV is attached to a wall, you can mount
the unit on the wall directly below the TV
screen.
Wall Mounting (if using option-B)
Note:
- Installation must be carried out by qualified
personnel only. Incorrect assembly can result in
severe personal injury and property damage (if
you intend to install this product yourself, you
must check for installations such as electrical
wiring and plumbing that may be buried inside
the wall). It is the installer’s responsibility to
verify that the wall will safely support the total
load of the unit and wall brackets.
- Additional tools (not included) are required for
the installation.
- Do not overtighten screws.
- Keep this instruction manual for future
reference.
- Use an electronic stud finder to check the wall
type before drilling and mounting.
1. Drill 2 parallel holes (Ø 5.5-6 mm each
according to wall type) in the wall. The distance
between the holes should be 944 mm.
2. Firmly fix 1 dowel into each hole in the wall if
necessary. Tighten the wall mount brackets
on the wall with screws and screwdriver. Make
sure that they are securely installed.
3. Remove the screws at the back of the unit.
Install the wall mounting screws into the back
of the unit.
4. Lift the unit onto the wall mount brackets and
slot into place.
10
Connections
Dolby Atmos®
Dolby Atmos gives you amazing experience you
have never before by overhead sound, and all the
richness, clarity, and power of Dolby sound.
For using Dolby Atmos®
Dolby Atmos® is available only in HDMI mode. For
the details of the connection, please refer to “ HDMI
Connection
”.
1. To use Dolby Atmos® in HDMI 1 and HDMI 2
mode, Your TV had to support Dolby Atmos® or
HDMI audio passthrough.
2. Make sure that “No Encoding“ is selected for
bitstream in the audio output of the connected
external device (e.g. Blu-ray DVD player, TV
etc.).
3. While entering Dolby Atmos / Dolby Digital /
PCM format, the soundbar will show DOLBY
ATMOS / DOLBY AUDIO / PCM AUDIO.
4. While the soundbar is using Dolby Atmos
audio, you can only adjust the bass level of
the subwoofer. All other EQ effects will not be
available.
Use the HDMI Socket
Some 4K HDR TVs require the HDMI input or
picture settings to be set for HDR content
reception. For further setup details on HDR
display, please refer to the instruction manual of
your TV.
Using HDMI to connect the soundbar, AV
equipment and TV:
AV equipment
HDMI IN
HDMI (ARC)
OR
HDMI OUT
Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your soundbar through a single HDMI connection.
To enjoy the ARC function, please ensure your
TV is both HDMI-CEC and ARC compliant and set
up accordingly. When correctly set up, you can
use your TV remote control to adjust the volume
output (VOL +/- and MUTE) of the soundbar.
- Connect the HDMI cable (not included) from
unit's
HDMI OUT (ARC)
socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press the
remote control to select HDMI ARC .
Tips:
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to
On.
• The setting method of HDMI-CEC and ARC
may differ depending on the TV. For details
about ARC function, please refer to the owner’s
manual.
Method 2: Standard HDMI
- If your TV is not HDMI ARC-compliant, connect
your soundbar to the TV through a standard
HDMI connection.
1. Use an HDMI cable (not included) to connect
the soundbar's
HDMI OUT (ARC)
socket to the
TV’s HDMI IN socket.
2. Use an HDMI cable (not included) to connect
the soundbar's
HDMI IN (1 or 2)
socket to your
external devices (e.g. games consoles, DVD
players and blu ray).
EN
FR
ES
SL
HR
CZ
HU
PT
RO
PL
8 9