manualshive.com logo in svg

Hirschmann QPE 8600, Operating Manual, Page: 2 / 45

Share
Download
Hirschmann QPE 8600 Operating Manual Download Page 2

Contents

Introduction

1 - 1

General notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 - 2

Technical modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Explanation of warning and note symbols. . . . . . . . . . . . . . . .

1 - 2

Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 - 3

Introduction to digital TV broadcasting technology. . . . . . . . . .

1 - 4

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6

Putting into operation

2 - 1

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 - 2

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

SAT receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Clock recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

Data processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

Block diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Interfaces and operating elements . . . . . . . . . . . . . . . . . . . . .

2 - 7

Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8

Start-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 - 10

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

Contents

QPE 8600

0 - 2

QPSK-receiver

Summary of Contents for QPE 8600














































Reviews:

No comments