Operator’s Manual
PRS 80
40
8
MAINTENANCE
The only maintenance required is to change the batteries when required. Also, check the mounting
hardware daily to ensure that there is no damage. Replace any damaged parts before operating the
crane.
8.1
Battery Replacement
To replace the batteries, remove the 4 screws from the transmitter housing. In During battery
replacement, use caution when opening the battery cover and transmitter to avoid damage to the
gasket causing moisture ingress which could corrode the batteries and terminals. Inspect the gasket
surface on the transmitter for nicks or other damages that may prevent the gasket from sealing. If it
appears to be damaged, a replacement gasket should be installed.
Install 4 fresh batteries into the proper location and direction as indicated on the battery holder.
Make sure that the cardboard tube is installed as shown.
LOOSEN
4
SCREWS
INSPECT
CONDITION
OF
GASKET
Software version
Battery direction
BATTERY DIRECTION LABEL
INSTALLED BATTERIES IN CARDBOARD TUBE
© Hirschmann PRS80 REV. C 09/26/05
190183_D.DOC
Summary of Contents for PRS 80
Page 1: ...www hirschmann com P N 031 300 190 183 Rev D 11 08 10 PRS 80 OPERATOR S SERVICE MANUAL ...
Page 2: ......
Page 4: ......
Page 6: ......
