Service and Maintenance
19
5.5
Wind
5.5.1 Display
The wind speed can be shown by itself on the screen or if in combination with other sensors, as an
icon on the bottom of the screen.
PEAK VALUE
CURRENT WIND SPEED
UNITS
% of LIMIT
The speed can be shown in miles per hour, or kilometers per hour.
When the wind speed is displayed by itself, the peak speed is also shown. The peak will be the
highest wind speed recorded since the system was started. When the system is turned off the peak
value will be reset. The peak value can also be reset by pressing the
button.
The % of limit is shown at the bottom.
5.5.2 LIMITS
The system sets the default speed limit to 30 mph. This is represented in by the bargraph. The
bargraph shows the % of the limit that is set. The limit can be set to other values.
To change the default limit, press
, then select the sensor for the limit that you want to set.
Use the arrows to change the value. Use the
to confirm the values.
Note: a prewarning can be set so as to beep the alarm when a limit is approached but not reached.
This is set with the warning option. Menu- SETUP/ SCREEN/BEEPER/ WARNING.
© Hirschmann PRS80 REV. D 11/08/10
190183_D.DOC
Summary of Contents for PRS 80
Page 1: ...www hirschmann com P N 031 300 190 183 Rev D 11 08 10 PRS 80 OPERATOR S SERVICE MANUAL ...
Page 2: ......
Page 4: ......
Page 6: ......
