PRS 80 Wind Speed Operator’s/Service Manual
© Hirschmann ECS, 2006; PRS 80 Wind Speed Rev.C 05/23/06
190184_C
10
7
SERVICE / TROUBLESHOOTING
Daily maintenance of the system consists of inspecting:
1. The electrical wiring connecting the various parts of the system.
If electrical wiring is damaged, it shall be replaced immediately.
2. If the insulation is worn on the electrical wiring or cable guides are damaged, these parts shall be
replaced.
3. A damaged or punctured display must be replaced immediately to prevent ingress of water and
damage to the internal circuitry.
Other than correcting the problems identified in the Malfunctions Table and replacing faulty
mechanical parts and cables, no other repairs shall be performed by non-expert personnel.
When the Hirschmann ECS PRS 80 system is turned on, it will show the following screen. This screen
shows the telephone number of Hirschmann ECS and the software version.
Make sure the display is working and all the lights come on during this time. Listen to the buzzer
sound. If any of the components above fails, please contact your nearest service representative before
operating the system!
