5
Safety Instructions
Version 04 05/2014
Notes on safety
This manual contains instructions to be observed for
ensuring your personal safety and for preventing damage.
The warnings appear next to a warning triangle with a
different heading depending on the degree of danger
posed:
z
Danger!
Means that death, serious physical inj ury or consi-
derable damage to equipment
will
occur if the
required precautionary measures are not taken.
z
Warning!
Means that death, serious physical injury or consi-
derable damage to equipment
can
occur if the
required precautionary measures are not taken.
z
Caution!
Means that minor physical inj ury or damage to
equipment can occur if the required precautionary
measures are not taken.
Note:
Contains important information on the product, on how to
manage the product, or on the respective section of the
documentation to which your particular attention is being
drawn.
Qualification requirements for personnel
Note:
Qualified personnel as understood in this manual and the
warning signs, are persons who are familiar with the
setup, assembly, startup, and operation of this product
and are appropriately qualified for their job. This inclu-
des, for example, those persons who have been:
– trained or instructed or authorized to switch on and off,
to ground and to label power circuits and devices or
systems in accordance with current safety engineering
standards;
– trained or instructed in the care and use of appropriate
safety equipment in accordance with the current stan-
dards of safety engineering;
– trained in providing first aid.
General safety instructions
D
This device is operated by electricity. You must follow
precisely the prescribed safety requirements in the
operating manual that relate to the voltage connect -
ions!
D
Make sure that the electrical installation meets local
or national safety regulations.
z
Warning!
Non-observance of these safety instructions can
cause materia l damage and/or serious injuries.
Only appropriately qualified per sonnel should work
on this device or in its vicinity. This per sonnel must
be thoroughly familiar with all the warnings and
maintenance procedures in accordance with this
operating manual.
The proper and safe operation of this device
depends on proper handling during transport,
proper storage and assembly, and conscientious
operation and maintenance procedures. Never
start operation with damaged components.
z
Warning!
Any work that may be required on the electrical
installation may only be carried out by personnel
trained for this purpose.
z
Warning!
LASER CLASS 1 in compliance with IEC 60825-1
(2001).
Correct operation
Please note the following:
z
Warning!
The device may only be used for those purposes
specified in the catalog and in the technical
description, and only in combination with external
devices and components approved by Hirsch-
mann. The proper and safe operation of this pro-
duct depends on proper handling during transport,
proper storage and assembly, and conscientious
operation and maintenance procedures.