4 Setting Up
4.5 Installing repeater
26
Version 04 05/2014
The Fiberoptic Repeater OZD Profi 12M … PRO can
be mounted on a 35 mm DIN rail in accordance with
IEC 60715: 1981 + A1: 1995.
䊳
Install the device in a location where the climatic
threshold values specified in the technical data are
adhered to.
䊳
Ensure that there is sufficient room to connect the bus
and power supply cabling.
䊳
Connect the optical fiber line before mounting the
repeater as this simplifies the procedure.
䊳
Mount the repeater on the DIN rail.
To do this, hang the top latch of the repeater into the
DIN rail and press the underside onto the rail - as
shown in Fig. 8 - until the latch clicks in.
Note:
You can remove the repeater from the DIN rail by
unlocking the snap lock with a screwdriver, as shown in
Fig. 9.
4.5 Installing repeater
click !
Fig. 8: Mounting a repeater on a DIN rail
Fig. 9: Removing the repeater from a DIN rail