Hirschmann Octopus II, User Manual

Page: 42 / 66

42
Installation Octopus II
Release 06 10/2018
The supply voltage is connected to the device casing through protective
elements exclusively.
You have the option of supplying the supply voltage redundantly, without
load distribution.
With a non-redundant supply of the supply voltage, the device reports the
loss of a supply voltage. You can prevent this message by changing the
configuration in the Management.

Connect the electrical wires to the socket according to the pin
assignment.
Type and specification of the
supply voltage Pin assignment
when using PoE:
Rated voltage
48 V DC
Voltage range incl. maximum
tolerances
47 V DC ... 57 V DC
when using PoE+:
Rated voltage
54 V DC
Voltage range incl. maximum
tolerances
53 V DC ... 57 V DC
without using PoE or PoE+:
Rated voltage range
24 V DC ... 48 V DC
Voltage range incl. maximum
tolerances
19 V DC ... 60 V DC
P1+
Plus terminal of supply
voltage 1
P1 − Minus terminal of supply
voltage 1
P2+ Plus terminal of supply
voltage 2
P2 − Minus terminal of supply
voltage 2
P2
-
P1+
P2+
P1
-