Maintenance and Repair
6 Maintenance and Repair
The
vSCALE D3
operating console contains no wearing parts and therefore cannot be opened. If
you notice malfunctions or differences between actual and displayed measured values, you should
switch the device off and have it checked and, if necessary, repaired immediately by an authorised
Hirschmann service partner.
Maintenance
You must always keep the full details contained on the type plate to hand.
Clean the surface and the front screen of the device occasionally with a damp cloth and a mild
detergent. Never use abrasive or aggressive detergents however as these may damage the device.
Cleaning
IMPORTANT
Device may be damaged by the use of high pressure cleaners.
The device must not be treated with a high pressure cleaner or similarly aggressive methods
under any circumstances!
Damage to the front foil can lead to the penetration of moisture and dirt into the interior of the
device, so that it must then be repaired properly without delay.
Repair
Keep the contacts and the area around the device connectors clean and check occasionally that all
connections are secure.
If parts are damaged, these must be repaired properly or replaced immediately.
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com
50
/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
