Commissioning
4.3.1 Zero point adjustment of the main boom angle sensor
Move crane to 0° working position (boom back), stabilise and align precisely.
Luff boom to a position which permits complete retraction.
Preconditions:
Calling up function
from adjustment menu.
1)
Retract main boom fully.
Confirm with
key when completed.
2)
Luff main boom down to 0°
Confirm with
key when completed.
3)
Use spirit level to check precise horizontal alignment
of the boom.
Confirm with
key when completed.
Zero point is re-adjusted.
4)
Angle direction is checked. To do this:
Luff main boom up by at least 5° .
Confirm with
key when completed.
5)
Sensor and angle direction are now adjusted.
Confirm next with
key.
Adjustment menu appears.
Select next sensor for adjustment as required.
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com
26
/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
