Hirschmann MACH4000 Series, User Manual

Page: 31 / 68

Installation MACH4000
Release 14 06/2013
31
1.9.3 1000 Mbit/s F/O connection
These ports are SFP slots.
1000 Mbit/s F/O ports enable the connection of terminal devices or
independent network segments according to the IEEE 802.3 1000BASE-
SX/1000BASE-LX standard.
These ports support:
 Autonegotiation

Full duplex mode
Delivery state: autonegotiation activated
Note: Make sure that you connect LH ports exclusively with LH ports, SX
ports exclusively with SX ports, and LX ports exclusively with LX ports.
1.9.4 10 Gbit/s F/O connection
10 Gbit/s F/O ports enable the connection of terminal devices or independent
network segments in compliance with the IEEE 802.3ae 10GBASE-SR/LR
standard.

Full duplex mode
Default setting: Full duplex
Note: Make sure that you connect SR ports exclusively with SR ports, LR
ports exclusively with LR ports, ER ports exclusively with ER ports, and ZR
ports exclusively with ZR ports.
1.9.5 PoE ports
The M4-FAST 8TP-RJ45 PoE media module supports Power over Ethernet
(PoE) according to IEEE 802.3af.
The PoE ports allow the connection and remote supply of, for example, IP
telephones (Voice over IP), webcams, sensors, printer servers and WLAN
access points. With PoE, power is supplied to these terminal devices via the
twisted-pair cable.
The following applies to PoE ports:

Max. Powered Device (PD) class 0 (15.4 W)
 The PoE voltage is supplied via the wire pairs transmitting the signal
(phantom voltage).

The individual ports (joint PoE voltage) are not electrically insulated from
each other.
Ports PoE support
1 to 4 Yes
5 to 20 No
Table 6: Twisted-pair ports and PoE support