Hirschmann MACH 1040 Series, User Manual

Page: 35 / 78

Multiple Rings
Redundancy L2B
Release 6.0 07/2010
3.1 Sub-Ring
35
Select the Sub-Ring Manager mode (SRM mode). You thus specify
which connection between the primary ring and the Sub-Ring
becomes the redundant line.
The options for the connection are:
X
Both Sub-Ring Managers have the same setting (default
manager
): - the device with the higher MAC address manages
the redundant line.
X
In the SRM Mode field, a device is selected to be the
redundant
manager
: - this device manages the redundancy line as long as
you have configured the other Sub-Ring Manager as a
manager
,
otherwise the higher MAC address applies.
Configure Sub-Ring Manager 1 as the “manager” and Sub-Ring
Manager 2 as the manager of the redundant line with “redundant
manager”, in accordance with the overview drawing for this
example.
Leave the fields VLAN ID (default 0) and MRP Domain (default
255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.2
55) as they are. The example configuration does not require any
change here.
Click “Set” to temporarily save the entry in the configuration.
Click “Back” to return to the Sub-Ring dialog.
enable
Switch to the Privileged EXEC mode.
configure
Switch to the Configuration mode.
sub-ring new-ring 1
Creates a new Sub-Ring with the Sub-Ring ID 1.
Sub-Ring ID created:ID: 1
sub-ring 1 port 1/9
Defines port 9 in module 1 as the Sub-Ring port.
Port set to 1/9
sub-ring 1 ring-name Test
Assigns the name “Test” to Sub-Ring 1
Sub-Ring Ring name set to "Test"
sub-ring 1 mode manager
Configures the mode of this Sub-Ring Manager
as “manager”.
Mode of Switch set to manager