manualshive.com logo in svg

Hirschmann MACH 1040 Series, User Manual

Share
Download
Hirschmann MACH 1040 Series User Manual Download Page 23

Ring Redundancy

Redundancy L2B

Release 6.0 07/2010

2.2 Example of an MRP-Ring

23

Display in “Operation” field:

X

forwarding

: this port is switched on and has a link.

X

blocked

: this port is blocked and has a link

X

disabled

: this port is disabled

X

not-connected

: this port has no link

Figure 6: Ring Redundancy dialog

…

In the “Ring Recovery” frame, select 200 ms.

Note: 

If selecting 200 ms for the ring recovery does not provide the ring 

stability necessary to meet the requirements of your network, you select 
500 ms.

Note: 

Settings in the “Ring Recovery” frame only take effect for devices 

configured as ring managers.

…

Under “Configuration Redundancy Manager”, activate the advanced 
mode.

…

Activate the ring manager for this device. Do not activate the ring 
manager for any other device in the MRP-Ring. 

…

Switch the operation of the MRP-Ring on.

…

Click “Set” to temporarily save the entry in the configuration.

Summary of Contents for MACH 1040 Series















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands