Configuration
5.7 Setting the angle range (angle sensor only)
If an angle sensor is connected, this function is used to define the type of sensor being used.
Follow the procedure described below in order to adjust the angle range.
1.
Open the housing of the iFLEX TRS 14 as described in chapter 4.3.
56s
59s
63s
67s
EEProm löschen
Winkelbereich -15...+15°
Winkelbereich 0...90°
(keine Bedeutung)
▲
2.
Press and hold the
programming button
of the iFLEX TRS14 until:
- the yellow
LED 2 flashes
(for selection of
angle range -15 to +15°, gSENS WGS-W1
)
- the yellow
LED 3 flashes
(for selection of
angle range 0 to +90°, gSENS WGF-W1
)
and then release the button.
The angle range is set as soon as the button is released.
© 2010 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · E-mail: [email protected]
32
/37
21-810-19-0003_421830_en (Rev A).doc / 2010-08-31 / Issue A / rk.