Installation Dragon PTN Nodes
21
Release 01 02/2018
For the configuration in HiProvision, see ‘Power over Ethernet (PoE)’ in the 'Dragon PTN and
HiProvision operation manual', see Ref.[1] in Table 1.
Following PSUs can be ordered:
ACPoE-A DIN Rail PSU (942 235-001), see below;
DCPoE-A DIN Rail PSU (942 235-002), see below;
a.
ACPoE-A DIN Rail PSU (942 235-001)
This ACPoE-A PSU has a wide-range input of 100-240VAC and an output range of 48-56VDC.
The output voltage has been factory set to 56V.
In normal conditions, the continuously available power is 480W. As of higher ambient tem-
peratures and as of an altitude of 2km, derating occurs resulting in less available output cur-
rent and power, see Figure 18 .
Cable 942 256-105 (3m) must be used to connect the PoE source to the NSM, see below:
Figure 17
ACPoE-A PSU to NSM-A Connection
See the table below for the PoE PSU (942 235-001) specifications.
56 VDC
100-
240
VAC
N L
+ + - -
DC 48V 10A
DC ok
13
14
Parallel Use
Single Use
DC ok
AC 100-240V
48-
56V
100-
240
VAC
N L
+ + - -
DC 48V 10A
DC ok
13
14
Parallel Use
Single Use
DC ok
AC 100-240V
48-
56V
ACPoE-A PSU
(942 235-001)
PoE Connector Cable
(942 256-105)
Factory set to 56V
56 VDC
