10
Installation Dragon PTN Nodes
Release 01 02/2018
The following functions can be performed via the module board itself (after unplugging it):
Setting the Node Number via rotary DIP switches;
Setting the NSM hardware edition (labeled as CARD_ID). This edition is factory set and
must not be changed;
The NSM only communicates with the active CSM within its node and does not use Dragon
PTN bandwidth. The NSM can be replaced and is hot-swappable.
Figure 6
NSM-A, NSM-B: Front Panel
2.2.2
Functions
a.
Rotary DIP Switch Settings
The
Hardware Edition
(labeled as CARD_ID) and
Node Number
on the NSM are set by rotary
DIP switches. In order to access them, the NSM must be partly removed from the node chas-
sis.
Digital input (DI)
ports
Handle
PoE external
power input
Digital input (DI)
ports
NSM-A
with PoE Connectors
NSM-B
without PoE Connectors
LEDs
Handle
LEDs
Hidden CSM
switch-over button
Fastening screw
Fastening screw
Hidden CSM
switch-over button
Digital output (DO)
ports
Digital output (DO)
ports
