Hipo INKJET plotter manual
6
Wrong plugging Correct plugging
（
i
）
Connect the Three-core cable between the handpiece and the
draw rod. Make sure that the plug matches the socket, and screw down
the plug body.
（
g
）
Connect the USB Interface cable.
The computer should be turned off when connecting USB cable. One
end of the cable is connected to the USB port of the computer and the
other to the USB port of the plotter. Make sure to fix it in the clip.
（
k
）
Connect the power cord.
When the power is switched to “O”, connect one end of the power
cord with the plotter, and the other end to the power patch board which
has reliable
protective groundwire
.
Attention: please make sure that the line voltage is consistent to
the Voltage parameter labeled on the plotter.
