Hipo INKJET plotter manual
31
10, do not put the plotter in the following locations:
①
slope
②
areas that are Prone to shake or rock,
③
areas that are prone to have dramatic changes in temperature and
humidity
④
areas that are exposed to the sun, glare, or heat
⑤
areas that are dusty
(4) Maintenance
1, after a certain period of using the plotter, you can add a small
amount of lubricating oil to the guide way if the noise of the cartridges
movements augments.
2, raster is a fine measuring instrument, you should not touch or pull
the metal strip. If the surface is covered by too much dust, you can blow it off or
flip it sway.
3, if the environment is comparatively quite dry, you should try to keep
moderate humidity around the nozzle.
4, If the plotter is not to be used for a long time, please remove the
nozzle and put it in a sealed case to avoid stoppage in the jet hole.
