3.3 Connect a cable to the GP-IB connector or RS-232C connector
19
Connect the GP-IB cable to the GP-IB connector.
Connect the RS-232C cable to the RS-232C connector.
3.3
Connect a cable to the GP-IB
connector or RS-232C connector
• Always turn both devices OFF when connecting and disconnecting an
interface connector. Otherwise, an electric shock accident may occur.
• Failure to fasten the connectors properly may result is sub-specification
performance or damage to the equipment.
To avoid damage to the device, do not short-circuit the terminal and do not input
voltage to the terminal.
Using the GP-IB Interface
Rear Panel
Recommended cable:
HIOKI Model 9151-02 GP-IB Connector Cable (2 m)
Using the RS-232C Interface
6 7 8 9
1 2 3 4 5
Rear Panel
Male 9-pin D-sub
#4-40 attaching screws
Pin No.
Signal
Name
Code Addr.
Mutual connection
circuit name
Remarks
EIA
JIS
1
DCD
CF
CD
Carrier Detect
Not used
2
RXD
BB
RD
Receive Data
3
TXD
BA
SD
Transmit Data
4
DTR
CD
ER
Data Terminal Ready
Not used
5
GND
AB
SG
Signal Ground
6
DSR
CC
DR
Data Set Ready
Not used
7
RTS
CA
RS
Request to Send
Not used
8
CTS
CB
CS
Clear to Send
Not used
9
RI
CE
CI
Ring Indicator
Not used
