2.6 Setting the Operating Conditions
16
This section describes how to set the operating conditions according to the man-
ner in which the device is to be used.
Settings are configured via either of the device’s external interfaces:
See:
GP-IB/RS-232C Interface (p.17)
The device cannot be configured directly in a standalone manner.
2.6
Setting the Operating Conditions
Setting function
Description of operation and settings
See page
Output voltage
Sets the output voltage.
Setup ranges: 1.0 to 1000.0 V (0.1 V resolution)
Voltage error alarm
Generates an alarm when the monitor voltage error relative to the output
voltage setting falls outside the set value range.
Setup ranges: ±2 to ±19% (1% resolution)
LCD display mode
Turns the LCD display on and off.
[OFF/ ON]
