28
6.6 Setting a V ariety of Functions
A variety of useful functions can be set when the RANGE selector switch is
set to any position other than the CAL , and by using the SELECT, UP and
DOWN switches.
Each time the SELECT switch is pushed, the LCD disp lay is changed in the
order of the Measuring Disp lay
→
C. SET
→
M. SET
→
COMP.
→
BUZZ
→
Measuring Display .
C. SET : Charg ing timer se tting
M. SET : Measuring time setting
COMP. : GO/NO judgment level setting
BUZZ : Buzzer sound ON/OFF setting
6.6.1 Setting the Timer
Examp le: Setting a measuring time to 50 seconds
Fig. 6.6.1
1) Press the SELECT switch twice to show the M. SET indication in the
lower left area of the LCD for the measuring timer setting mode.
2) Using the UP and DOWN switches, set the time indication in the upper
center area of the display to 050 seconds.
3) Press the SELECT switch 3 times to return to the measuring display.
To acce lerate the change of a value, keep the corresponding UP or DOWN
switch pushed.
6.6.2 Setting the Comparison GO/NO Judging Level
Example: Setting a judgment of NO
<
100M
Ω ≦
GO for 100 V test voltage
Fig. 6.6.2
ＶＯＬＴＡＧＥ
ＲＡＮＧＥ
０５０
DOWN
UP
２
100
2
×10
Ｍ.ＳＥＴ
ｓ
CHARGE
MEASURE/DISCHARGE
SELECT
ＭΩ
１０
２０
１０
５
２
１
．５
１００Ｖ
ＶＯＬＴＡＧＥ
ＲＡＮＧＥ
DOW
N
UP
100
２
2
×10
ＣＯＭＰ
ｓ
CHARGE
MEASURE/DISCHARGE
SELECT
ＭΩ
１０
２０
１０
５
２
１
．５
０００
１００Ｖ
