14
⑤
SELECT Switch: This switch moves the cursor in the LCD display to the
desired item set it.
This switch also acts as a STOP switch; this switch makes the voltage
on the Rx
/+
measuring terminals OFF when it is pressed while
the measuring voltage is being applied.
⑥
DOWN Switch: This switch decreases the value to set each time it is
pressed.
⑦
UP Switch: This switch increases the value to set each time it is pressed.
⑧
CHARGE Switch: This switch applies the measuring voltage across the Rx
measuring terminals to charge the sample to be measured when it is
pressed. During the charging period, the V. OUT indicator lights.
the next press of this switch discharges the sample, turning off the
V. OUT indicator.
Note: When the timer function is used to determine the charging
period, the measurement automatically starts when the set
time is up.
⑨
MEASURE/DISCHARGE Switch: This switch starts a measurement of the
sample in connection, when it is pressed, turning on the
incorporated indicator and the V. OUT indicator.
The next press of this switch discharges the sample, turning off the
two indicators.
⑩
VOLTAGE Selector Switch: This switch selects the voltage to be applied
across the Rx
+/
measuring terminals. The arrow on the knob shows
a voltage to output.
⑪
RANGE Selector Switch: This switch selects a factor for the measured
value.
The selected factor is also shown at the
×
10 multiplier area.
