Hioki 3801-50, Instruction Manual

Page: 67 / 94

4.9 Auto Power Save Function
63
1
2
3
4
5
6
7
8
9
10
11
Power O
n
Opt
ions
This procedure sets the time until the auto power save
function is activated. The auto power save function is
activated after the set time elapses since the last time the
rotary switch or a key was operated. The auto power
save function turns off the display screen and minimizes
the instrument's internal power consumption.
4.9 Auto Power Save Function
• In order to resume operation from the auto power
save function, either turn the rotary switch to OFF
and turn the power back on again or else press any
key. In the case of pulse output, press any of the
HOLD
,
REL
,
RANGE
or
DUAL
keys or set the function
switch to a position other than pulse output and then
back to its original position. The 3801-50 reverts to
the power ON state.
• The auto power save function is automatically dis-
abled when either the peak hold function or the
recording function is used.
• To disable the auto power save function, hold down
the key while turning the function switch to turn on
the instrument.
3 4
1. In order to display the Power On
Option setting screen, hold down
the
SHIFT
key while turning the
function switch.
2. Press the
REL
key 4 times to dis-
play the Auto Power Save setting
screen.
3. Set the Auto Power Save function.
RANGE
key: Increases the value
DUAL
key: Decreases the value
SHIFT
key: Selects the digit
4. Confirm the selection by pressing
the
Hz
key.
5. Hold down the
SHIFT
key to enter
the measurement screen.
Otherwise, turn the function switch
to OFF to finish setup.
15 min (default)
/ 1 to 99 min
/ OFF
1 SHIFT +
Power On
2
(4 times)
5