Hioki 3801-50, Instruction Manual

Page: 14 / 94

10
1.3 Names and Functions of Parts
Lights when under remote control.
Lights when the pulse output function is being used.
Lights when the DCV measurement or DCA measurement func-
tion is being used.
Lights when the ACV measurement or ACA measurement func-
tion is being used.
Lights when the AC+DCV measurement or AC+DCA measure-
ment function is being used.
AUTO Lights when the auto range function is being used.
/ /
Indicates the thermocouple type for temperature measurement.
The type that is selected lights.
Lights when the diode check function is being used.
Lights when the continuity check function is being used.
REL Lights when the relative value display function is ON.
TRIG
Lights when the trigger hold function is ON.
MAX
Lights when the maximum value is being displayed.
(Peak hold, recording function)
MIN
Lights when the minimum value is being displayed.
(Peak hold, recording function)
AVG
Lights when the average value is being displayed.
(Recording function)
Lights when the percentage conversion display is 0 to 20mA
Lights when the percentage conversion display is 4 to 20mA
Lights when the DUTY ratio measurement or pulse width mea-
surement function is being used.
Low battery indicator. This lights when the battery needs to be
replaced.
APS Lights when the auto power save function is ON.
Display
Sub display and units
Main display and units
Bar graph
Remote
K J
0°
C
HOLD
0-20
4-20