This is the safety alert symbol. It alerts an
operator to information concerning per-
sonal safety. Always observe and heed
these instructions, otherwise death or serious
injury can result!
Operator safety is a principle concern in equipment
design and distribution. However, many accidents
occur because a few seconds of thought, and a more
careful approach to handling, were ignored.
Accidents can be avoided by knowing and following
the precautions cited in this manual.
GENERAL SAFETY
1. Read this manual thoroughly. Make sure the op-
erator understands it and knows how to operate
this equipment safely. This equipment can kill or
injure an untrained or careless operator and by-
standers. If you sell this equipment, ensure the
new owner acknowledges receipt of this manu-
al.
2. Make sure the engine cover is securely fastened
to the spreader before starting the engine and
operating the spreader.
3. Do not attempt to handle or service this equip-
ment, or direct others to do the same, unless
you know how to do it safely and have the prop-
er tools for the job.
4. Keep hands, feet, hair, and clothing away from
moving parts. Flying material can cause bodily
injury. Wear eye protection.
5. Do not alter the equipment to the extent of com-
promising safety or performance.
6. Material to be spread can be dangerous. Im-
proper selection, application, use or handling
may be a hazard to persons, vehicle or other
property. Follow instructions and precautions
given by the material manufacturer.
7. Do not over-load your vehicle beyond payload
limits. If there are any questions, contact the ve-
hicle manufacturer.
8. Do not use side extensions on your spreader to
increase salt storage capacity. Using side exten-
sions may damage hopper and cause injury to
personnel.
SAFETY
9. Do not drive motor vehicle with swing away
chute open or unlatched. Make sure swing away
chute is fully engaged in its working position or
damage to your spreader chute may occur.
10. Make sure the spreader is securely fastened to
the vehicle in accordance with this manual.
BEFORE OPERATION
1. Discipline yourself to visually check for worn,
damaged or cracked parts before starting use.
Replace these with genuine Hiniker parts.
2. Check all controls and operating functions of the
machine in a safe area before starting to work.
3. Do not lubricate, adjust or clean the machine
while it is running. After making adjustments,
check machine thoroughly for loose parts, hard-
ware and tools.
DURING OPERATION
1. Drive carefully and always wear seat belts when
operating a motor vehicle.
2. Ensure everyone is clear of the machine, espe-
cially away from blind areas of the operator, be-
fore starting or operating this equipment.
3. Stay out of hopper when conveyor power source
is engaged. If machine becomes blocked, do not
attempt to remove blockage until machine has
been shut off and conveyor and spinner move-
ment have stopped.
Use a shovel or other long-handled tool to reach
inside the hopper. Never attempt to break up
material inside the hopper with hands or feet.
4. Do not ride in any part of spreader while vehicle
is in motion.
5. Set the brakes and stop the truck’s engine be-
fore adjusting or servicing your spreader.
AFTER OPERATION
1. Inspect the spreader for components that have
become excessively worn or damaged and must
be repaired or replaced.
2. Develop a regular maintenance schedule to en-
sure safe, dependable spreader operation.
Safety 3
