Installation Instructions for:
105295-HEI Kit
Gen1 to Gen5
Control System
SPEED TUNING
How to Adjust the Lift Speed
1.
Pull out the red Emergency Stop button to the on
position at the ground controls.
2.
Push in the red Emergency Stop button to the off
position at the platform controls.
3.
Turn the key switch to platform controls.
4.
At the platform controls, press and hold the lift
function select and horn buttons and pull out the
red Emergency Stop button to the on position.
Outcome: The diagnostic display will show “PS”.
5.
Release the lift function select and horn buttons.
Outcome: The diagnostic display, at the platform
controls and the ECM, will show the maximum lift
speed percentage.
6.
Press the lift function select button.
7.
Use the steering thumb rocker switch on the
joystick to increase or decrease the maximum lift
speed percentage. Refer to Section 2,
Specifications, in the appropriate Service Manual
for function speeds.
8.
Turn the key switch to the off position.
Note: Any change in software settings will not take
effect until the key switch is turned to the off
position.
a
Joystick Controller with Thumb Steering
Rocker
b
Horn Button
c
Lift Function Select Button
d
Red Emergency Stop Button
P/N 105294-HEI Rev.0
HEI
13/ 16
