F3 DIO 16/8 01
4 Start-up
HI 800 177 E Rev. 2.00
Page 45 of 60
4.4.5
Pulsed Outputs for F3 DIO 16/8 01
System Signal
R/W
Description
Mod.SRS [UDINT]
R
Slot number (System Rack Slot)
Mod. Type [UINT]
R
Type of module, target value: 0x00D3 [211
dec
]
Module error code
0x0000
I/O processing, if required with errors
see other error codes
0x0001
No I/O processing (remote I/O not in RUN)
0x0002
No I/O processing during the booting test
0x0004
Manufacturer interface operating
0x0010
No I/O processing: invalid configuration
0x0020
No I/O processing: fault rate exceeded
Mod. Error Code [WORD]
R
0x0040/
0x0080
No I/O processing: configured module not plugged in
Error code of the TO unit as a whole
DO.Error Code [WORD]
R
0x0001
Error of the TO unit as a whole:
Error code of the individual digital pulsed output channels:
DO[xx].Error Code [BYTE] R
0x01
Fault in the digital output module
Output value for TO channels:
0 Output
de-energized
1 Output
energized
DO[xx].Value [BOOL]
W
Pulsed outputs must not be used as safety-related outputs!
Table 32: ELOP II Factory - System Signals for the Pulsed Outputs