![background image](http://html1.mh-extra.com/html/hilti/te-4-a22/te-4-a22_manual_2136214014.webp)
10
Français
2153716
*2153716*
Trouble or fault
Possible cause
Action to be taken
The rotary hammer or the
battery gets very hot.
The rotary hammer has been over-
loaded (application limit exceeded).
▶
Select a tool that is suitable for
its intended use.
The insert tool can’t be re-
leased.
The chuck is not pulled back fully.
▶
Pull the chuck back as far
as it will go and remove the
accessory tool.
The tool makes no progress.
The rotary hammer has been set to
reverse rotation.
▶
Move the forward / reverse
selector switch to the “Forward”
position.
The function selector switch is set
to “Drilling without hammering”
.
▶
Set the function selector switch
to “Hammer drilling”
.
10
Disposal
WARNING
Risk of injury due to incorrect disposal!
Health hazards due to escaping gases or liquids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your
Hilti Store
, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which
Hilti
products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti sales representative for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
11
Manufacturer’s warranty
▶
Please contact your local
Hilti
representative if you have questions about the warranty conditions.
Mode d'emploi original
1
Indications relatives à la documentation
1.1
À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2
Explication des symboles
1.2.1 Avertissements
Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit. Les termes de
signalisation suivants sont utilisés :
DANGER
DANGER
!
▶
Pour un danger imminent qui peut entraîner de graves blessures corporelles ou la mort.
Summary of Contents for TE 4-A22
