![background image](http://html.mh-extra.com/html/hilti/sr-4-a22/sr-4-a22_original-operating-instructions_2135048021.webp)
*2200411*
2200411
English
15
3.3
Possible misuse
▶
Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶
Do not use the product to cut pipes that still contain liquids.
▶
Do not saw into unknown materials.
3.4
Liion battery status indicator
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the indicator of
the Liion battery. The charge status of the Liion battery is indicated after one of the two battery release
buttons is short-pressed.
Status
Meaning
4 LEDs light up.
• Charge state: 75 % to 100 %
3 LEDs light up.
• Charge state: 50 % to 75 %
2 LEDs light up.
• Charge state: 25 % to 50 %
1 LED lights up.
• Charge state: 10 % to 25 %
1 LED flashes.
• Charge state: < 10 %
1 LED blinks, the power tool is not ready for use.
• The battery has overheated or is completely
discharged.
4 LEDs blink, the power tool is not ready for use.
• The power tool is overloaded or has overheated.
Battery charge state cannot be indicated while the control switch is pressed and for 5 seconds after
the control switch has been released. If the LEDs of the charge state indicator flash, follow the
instructions in the 'Troubleshooting' section.
3.5
Items supplied
Reciprocating saw, operating instructions.
Other system products approved for use with this product can be found at your local
Hilti Store
or at:
www.hilti.group
| USA:
www.hilti.com
4
Technical data
4.1
Reciprocating saw
SR 4-A22
Rated voltage
21.6 V
Weight in accordance with EPTA procedure 01
3.8 kg
Stroke rate
0 /min … 3,000 /min
Stroke length
28 mm
Keyless chuck for standard accessory tools
1/2 in
4.2
Battery
Battery operating voltage
21.6 V
Ambient temperature
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
4.3
Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
Printed: 23.03.2018 | Doc-Nr: PUB / 5408534 / 000 / 01
Summary of Contents for SR 4-A22
