![background image](http://html.mh-extra.com/html/hilti/sr-4-a22/sr-4-a22_original-operating-instructions_2135048023.webp)
*2200411*
2200411
English
17
3. Check that the battery is seated securely.
5.4
Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out of its holder in the device.
5.5
Inserting the saw blade
Use only saw blades with a 1/2" connection end.
1. Engage the transport lock.
2. Check that the connection end of the accessory tool is clean and lightly greased. Clean it and grease it if
necessary.
3. Turn the chuck locking sleeve counterclockwise and hold it in this position.
4. Push the saw blade into the chuck from in front.
5. Release the locking sleeve and allow it to move back to its original position until it engages with an
audible click.
6. Grip and pull the saw blade to check that it is locked in position.
5.6
Removing the saw blade
1. Engage the transport lock.
2. Turn the chuck locking sleeve counterclockwise and hold it in this position.
3. Pull the blade forward out of the chuck.
4. Release the locking sleeve and allow it to move back to its original position.
5.7
Switching on
1. Disengage the transport lock.
2. Press the control switch.
5.8
Switching off
WARNING
Risk of injury!
Caused by the saw continuing to run.
▶
Do not lift the product away from the workpiece until it has stopped completely.
▶
Wait until the product stops completely before you lay it down.
1. Release the control switch.
2. Engage the transport lock.
5.9
Plunge cutting
WARNING
Risk of injury!
Risk of kickback.
▶
Apply the appropriate safety measures at the rear of the workpiece when plunge sawing. Use only
suitable saw blades (length as short as possible).
Use the plunge cutting technique only on soft materials and only with short saw blades. The product
can be used in one of two plunge cutting positions: in the normal position or in the reversed position.
1. Bring the forward edge of the AVR contact shoe into contact with the workpiece.
2. Disengage the transport lock.
3. Press the control switch.
Printed: 23.03.2018 | Doc-Nr: PUB / 5408534 / 000 / 01
Summary of Contents for SR 4-A22
