![background image](http://html.mh-extra.com/html/hilti/sr-4-a22/sr-4-a22_original-operating-instructions_2135048020.webp)
14
English
2200411
*2200411*
▶
Secure the workpiece to a stable support. Never hold the piece being cut in your hands or across your
leg.
▶
Switch the product on only after bringing it into the working position.
▶
Always guide the power tool away from your body when working with it.
▶
Apply only moderate pressure and cut at an appropriate speed, especially when cutting large-diameter
pipes. This will help to prevent the power tool overheating.
▶
Before cutting through pipes, make sure that the pipes are empty, i.e. that they do not contain liquids.
Drain the pipes if necessary.
▶
When cutting through pipes, hold the power tool above the level of the pipe you are cutting through.
◁
The power tool incorporates no protective measures to prevent ingress of water or moisture. Liquids
running out of pipes may cause a short circuit in the power tool.
▶
Never cut into unknown materials and keep the line of cut above and below the workpiece free of
obstacles.
◁
If the saw blade strikes an object it may cause the power tool to kick back.
▶
Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a
risk of injury (cuts or burns).
▶
Always remove the battery when the power tool is not in use, before maintenance, before changing
accessory tools and before transport.
▶
Engage the transport lock before storing or transporting the power tool.
▶
Observe the manufacturer’s instructions regarding the handling and storage of saw blades.
2.4
Battery use and care
▶
Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶
Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your
Hilti Service
.
▶
If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your
Hilti Service
.
3
Description
3.1
Product overview
@
Chuck (blade holder)
;
Control switch
=
Transport lock
%
Grip
&
Battery state of charge indicator
(
Battery release button
)
Battery
+
Rating plate
§
Front gripping area (hand guard)
/
AVR contact shoe
:
Saw blade
3.2
Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶
Use only
Hilti
Liion batteries of the B 22 series with this product.
▶
Use only
Hilti
battery chargers of the C4/36 series for charging these batteries.
Printed: 23.03.2018 | Doc-Nr: PUB / 5408534 / 000 / 01
Summary of Contents for SR 4-A22
