6
English
@
Chuck
;
Power tool / accessory interface (snap-on
connection)
=
Universal hook
%
Motor cooling air intake
&
Grip
(
Air exit
)
Forward / reverse selector switch with
safety lock
+
Control switch (with electronic speed
control)
§
Lockbutton for continuous operation
/
Belt hook
:
Charge state and fault display (Li-ion
battery)
∙
Battery release buttons
$
Depth gauge
3.2 Intended use
The product described is a hand-held mains-powered electric tool for use in drywall installation.
The power tool is designed for driving and removing screws in drywall installation work. Drywall screws with
a length of up to 55 mm and a diameter of up to 4.2 mm can be used.
Working with materials hazardous to health (e.g. asbestos) is not permissible.
3.3 Items supplied
Drywall screwdriver, operating instructions
Note
You can find other system products approved for use with your product at your local
Hilti
Center or
online at:
www.hilti.com
.
4 Technical data
4.1 Technical data
SD 4500
SD 2500
Rated current input
6.5 A
6.5 A
Weight
1.4 kg
(3.1 lb)
1.4 kg
(3.1 lb)
Rated speed under no
load
0 /min …4,500 /min
(0 Hz …75.0 Hz)
0 /min …4,500 /min
(0 Hz …75.0 Hz)
Max. torque
9.5 Nm
(7.0 ftlb
f
)
9.5 Nm
(7.0 ftlb
f
)
Socket/bit drive
Hex socket
1
/
4
"
Hex socket
1
/
4
"
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury!
Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Repositioning the universal hook
1. Press both battery release buttons simultaneously and pull the battery out of the screwdriver.
2. Release the two screws securing the universal hook.
3. Reposition the universal hook and threaded block on the opposite side of the tool.
4. Reinsert and tighten the two retaining screws.
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 01
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
