background image

2

English

DANGER!

Draws attention to imminent danger that will lead to serious personal injury or fatality.

WARNING!

Draws attention to a potentially dangerous situation that could lead to serious per-

sonal injury or fatality.

CAUTION!

Draws attention to a potentially dangerous situation that could lead to slight personal

injury or damage to the equipment or other property.

1.2.2 Symbols

The following symbols are used:

Draws attention to instructions or other useful information.

Read the operating instructions before use

Rated speed under no load

Revolutions per minute

Direct current (DC)

1.2.3 Illustrations

The illustrations in these operating instructions are intended to convey a basic understanding and may differ

from the actual version of the product:

These numbers refer to the corresponding illustrations found at the beginning of these operating

instructions.
The numbering in the illustrations reflects the order of the work steps in the illustration and may

deviate from the numbering of work steps in the text.
Item reference numbers are used in the overview illustration. In the product overview section, the

numbers shown in the legend relate to these item reference numbers.

1.3 Product information

Hilti

products are designed for professional use and may be operated, serviced and maintained only by

trained, authorized personnel. This personnel must be informed of any particular hazards that may be

encountered. The product and its ancillary equipment may present hazards when used incorrectly by

untrained personnel or when used not as directed.
• Make a note of the designation and serial number printed on the identification plate in the following table.

Always quote this information when you contact a Hilti representative or Hilti Service to enquire about

the product.

Product information

Type:

SD 6000

SD 5000

SD 4500

SD 2500

Generation:

01

Serial number:

2 Safety

2.1 Safety instructions

The safety rules given in the following section contain all general safety rules for electric tools which, in

accordance with the applicable standards, require to be listed in the operating instructions. Accordingly,

some of the rules listed may not be relevant to this tool.

Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 01

Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02

Summary of Contents for SD 2500















Reviews: