Volume normal
Volume low
Volume off
Press the “Back” key
if you wish to return to the menu.
6.5.2 Setting the units
Using the units function from the menu you can set the desired accuracy of the digital display in millimeters or inches.
After making each selection you are returned automatically to the normal operating mode or, alternatively, pressing
the “Back” key
will take you back to the menu.
Units
1 mm (0.04")
¹⁄₁₆"
2 mm (0.08")
¹⁄₈"
5 mm (0.2")
¹⁄₄"
10 mm (0.39")
¹⁄₂"
25 mm (0.98")
1"
6.5.3 System setup
The following items appear in the menu: “Activate / deactivate beam shields”
and “Sleep mode” .
6.5.3.1 Activating/deactivating the beam shields
The laser beam from the PR 300-HV2S can be shut off at one or more sides of the tool. This feature is useful when
you are using several laser tools simultaneously on the jobsite and it is necessary to prevent reception of the beam
from more than one laser tool. The laser plane is divided into four quadrants. These are marked on the casing of the
tool and can be set as follows:
1. In the menu , select the system settings
and confirm your selection by pressing the
key.
2. Select the “Activate / deactivate beam shields” function
and confirm your selection by pressing the
key.
3. Use the arrow keys
to navigate to the correct quadrant.
4. Activate / deactivate the desired quadrants by pressing the OK key .
5. Confirm this setting by pressing the OK key
.
If the quadrant is visible its status is “On”. If the quadrant is not visible its status is “Off”.
6. Press the “Back” key
to return to the “System setup” menu item
or press the “Menu” key
to return to
normal operating mode.
NOTE
Settings that affect the rotating laser only become effective when the rotating laser is switched on and a
wireless connection has been established.
6.5.3.2 Activating / deactivating sleep mode
The PR 300-HV2S saves power when in sleep mode. The laser is switched off, thereby extending battery life.
1. Press the “Menu” key
on the PRA 300.
2. Select system setup .
3. Use the arrow keys
to navigate to the option “Sleep mode” .
4. Confirm your selection by pressing the OK key .
en
12
Printed: 28.08.2015 | Doc-Nr: PUB / 5244524 / 000 / 00
Summary of Contents for PR 300-HV2S
