6.5.4.2 Inclined plane mode units
Under “Inclined plane mode units” the units to be used when entering an inclination can be set to percent, degrees or
thousandths.
1. Press the “Menu” key
on the PRA 300.
2. Choose the “Settings” key .
3. Use the arrow keys to select “Inclined plane mode units” .
4. Confirm your selection by pressing the
key.
5. Choose the correct units and activate these by pressing the
key.
6.5.4.3 Units
This item in the menu lets you choose between metric and imperial units.
1. Press the “Menu” key
on the PRA 300.
2. Choose the “Settings” key .
3. Press one of the arrow keys to select “Units” .
4. Confirm your selection by pressing the
key.
5. Choose the correct units and activate these by pressing the
key.
6.5.4.4 Wireless connection
If necessary, you can deactivate the receiver’s wireless connection and then use the receiver / remote control unit
simply as a receiver.
1. Press the “Menu” key
on the PRA 300.
2. Choose the “Settings” key .
3. Use the arrow keys to select the “Wireless connection” option .
4. Confirm your selection by pressing the
key.
5. Choose the correct wireless connection and activate this by pressing the
key.
6.5.5 Information
When this menu item is selected you have the following options:
Software version
The software version of the tool, receiver and PRA 90 can be viewed
here.
Date of last calibration
The date of the last calibration can be viewed here.
QR code
The QR code, which can be scanned with a smartphone, is linked to ani-
mation videos that explain how to operate the system.
You can leave the menu again at any time by pressing the “Menu” key
or the “Back” key .
6.6 Working in the horizontal plane
6.6.1 Setting up
1. Set up the tool in a suitable position for the application, e.g. on a tripod. Alternatively, the rotating laser may be
mounted on a wall bracket. The angle of inclination of the surface on which it stands should not exceed ± 5°.
2. Press the on/off button .
The “auto leveling” LED blinks green and the leveling status is shown in the display on the laser receiver.
The laser switches on, the beam begins to rotate and the “auto leveling” LED lights as soon as the tool has
leveled itself.
en
14
Printed: 28.08.2015 | Doc-Nr: PUB / 5244524 / 000 / 00
Summary of Contents for PR 300-HV2S
