14
en
2. Description
2.1 Intended use
The range meter is designed for the:
• Measurement of distances
2.2 Display
The measurements, settings and tool status are shown in
the display. When the tool is in measuring mode, the mea-
surements taken are shown at the bottom of the display
area (the result line).
2.3 Display illumination
In low light conditions, the display is illuminated automat-
ically as soon as a button is pressed. If no button is pressed
over a period of 20 seconds, the display illumination switches
off automatically.
1.2 Explanation of the pictograms and other
information
Read the
operating
instructions
before use.
Temperature
indicator
>1/4s
Do not look
into the beam.
Symbols
2
Laser class 2
Return waste
material for
recycling.
Battery status
indicator
Hardware
errors
Unfavorable
operating
conditions
Warning signs
General
warning
1.3 Location of identification data on the range meter
The type designation and serial number can be found on the
rating plate on the back side of the range meter. Make a note
of this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative or
service department.
Type:
Serial no.:
Laser class II according
to CFR 21, § 1040 (FDA)
CLASS II LASER PRODUCT
620-690nm/0.95mW max.
LASER RADIATION - DO NOT
STARE INTO BEAM
Symbols
KCC-REM-
HLT-PD5
02_BA_PD5_P1_en.qxp:01_BA_PD4_P1_de.qxd 10.1
Printed: 25.11.2014 | Doc-Nr: PUB / 5070028 / 000 / 02