![background image](http://html1.mh-extra.com/html/hilti/pd-20/pd-20_operating-instructions-manual_2135805015.webp)
28
29
4. Working with the PD 20
Measuring distances
continued
Switch on the tool.
The following is displayed:
After switching on the
tool, the reference
point is always set to
the rear edge of the
tool (symbol).
The laser beam is
switched on.
Position the rear edge of the tool at
the desired starting point and aim it at
the target from which the
measurement is to be taken.
Press the “measure” button.
The measured value is then
displayed.
4. Working with the PD 20
- - - - -
LASER
bEEP menu / beep sound
Unit menu / measurement units
Selecting and setting the menu, continued
3. Operation
Press the
button
to select menu mode.
Use the
,
buttons to select the
bEEP menu.
Use the
,
buttons to select the desired
beep mode:
ON
A beep is emitted when :
- A button is pressed
- A measurement is taken
- An error occurs
OFF
No beep sound
Auto
A beep is emitted when:
- A measurement is taken
- An error occurs
Press the
button
to select menu mode.
Use the
,
buttons to select the
UNIT menu.
Use the
,
buttons to select the desired
measuring unit:
m
Value displayed in m
in
Value displayed in feet, inches and
fractions
MENU
bEEP
OFF
MENU
UNIT
in