20
21
The Hilti PD 20 generates a visible laser beam
which is emitted from the front side of the tool.
The product conforms to laser class 2 as per:
• IEC825-1
1993 “Safety of laser equipment”
• EN60825-1
1994 “Safety of laser equipment”
Laser classification
2. Safety information
The product conforms to laser class II as per:
• FDA 21CFR Ch.I§1040
1988 (U.S. Department of Health and Human
Service, Code of Federal Regulations)
Laser class 2 /II products
Do not look into the laser beam and never aim it
at other persons.
Protection of the eyes is normally ensured by
defensive reactions including the eyelid closure
reflex.
WARNING
Looking directly into the beam with
optical aids (e.g. binoculars or
telescopes) can be dangerous.
Preventative measures
Never look into the beam using optical aids.
continued
2. Safety information
WARNING
Improper disposal of the equipment
may lead to the following:
• Burning of plastic components generates
toxic fumes which may present a health
hazard.
• If damaged or exposed to very high
temperatures, batteries may explode, causing
poisoning, burns, acid burns or environmental
pollution.
• Careless disposal enables unauthorised
persons to make improper use of the
equipment, which may lead to serious injury
to themselves or a third party and to pollution
of the environment.
Preventative measures
Most of the materials from which Hilti tools are
manufactured can be recycled. The materials
must be correctly separated before they can be
recycled. In many countries, Hilti has already
made arrangements for taking back old tools for
recycling. Please ask your Hilti customer service
department or Hilti representative for further
information.
Disposal
Part, assembly
Main material
Recycling
Casing
Plastic
Plastics
recycling
Control
Plastic
Plastics
panel
recycling
Measuring
Various
Electronics
module
scrap
or scrap
metal
Electronics
Various
Electronics
scrap
Screws, small
Steel
Scrap metal
parts
Carrying case
Plastic
Plastics
recycling
