![background image](http://html1.mh-extra.com/html/hilti/dst-10-ca/dst-10-ca_operating-instructions-manual_2136359048.webp)
44
English
2328079
*2328079*
▶
Check the machine for damage before use after long periods of transport or storage.
12
Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to rectify
the problem by yourself, please contact
Hilti
Service.
Trouble or fault
Possible cause
Action to be taken
The cut is not straight
Inadequate blade tension.
▶
Change the saw blade.
The saw blade is blunt.
▶
Change the saw blade.
Pay attention to the
specification.
No guide cut made or the
guide cut was not straight
▶
Check whether the given
guide values were ad-
hered to.
Flange not correctly tight-
ened
▶
Check that the flange
is seated correctly and
check the tightening
torque of the securing
screw.
▶
Repeat the flange installa-
tion procedure.
The play at the guide rollers
exceeds the specified value.
▶
Check the play at the
rollers and adjust the
rollers correctly. If ad-
justment is not sufficient,
replace the rollers or the
guide rail.
The rail fastenings are loose.
▶
Check the fastenings.
▶
Refasten the rails.
The rail distorts (twists).
▶
Install additional rail
supports.
Low sawing perfor-
mance
Unsuitable blade specifica-
tion
▶
Check the saw blade
specification.
▶
Change to the right
specification.
Depth of cut is excessive.
▶
Reduce the depth of cut.
Saw advance speed is too
low.
▶
Increase the saw advance
speed.
Drop in performance due
to the blade wandering off
course.
▶
See fault:
The cut is not
straight
.
Drop in performance due to
high reinforcement content.
▶
Make the cut in a different
position if the reinforce-
ment content is too high.
Saw blade speed of rotation
is too high or too low.
▶
Set the speed of rotation
correctly.
Summary of Contents for DST 10-CA
