Hilti DST 10-CA, Operating Instructions Manual

Page: 29 / 52

*2328079*
2328079 English 25
6.5 Mounting the rail on the rail supports for cutting on stairs
@
Leveling screw
;
Clamping plate with clamping
screw
=
Clamping insert for cutting on
stairs
%
Clamping screws for bevel-cut
angle
&
Slot for securing screw
1. Mount the rail supports for cutting on stairs
on the stairs.
2. Attach the clamping insert for cutting on
stairs to the rail support.
3. Slacken the clamping bolts for angle ad-
justment.
@
Clamping insert for cutting on stairs
;
Rail
=
End stop
%
Securing screw for the rail support
4. Mount the rail on the clamping insert for cutting on stairs.
5. Tighten the clamping bolt for the angle adjustment mechanism.
6. Check and adjust the offset distance of the rail from the cutting line and then tighten
the rail support fastening bolts.
7. Use the leveling screws to compensate for differences in level.
8. Fit end stops at the ends of the rail.