![background image](http://html1.mh-extra.com/html/hilti/dst-10-ca/dst-10-ca_operating-instructions-manual_2136359017.webp)
*2328079*
2328079
English
13
∙
Inner flange (saw blade: flush cut-
ting)
with countersunk-head screws (6
of)
$
Inner flange (saw blade: dry cutting)
3.2 Intended use
The product described is a water-cooled, electrically powered wall saw with wireless
remote control. It is designed for cutting lightly to medium-heavily reinforced concrete as
well as stone or masonry structures using diamond-tipped saw blades with a diameter of
between 600 and 1200 mm.
In addition to these operating instructions, the operating instructions for the remote
control unit must also be observed.
• Diamond-tipped saw blades with a diameter up to 1200 mm must be approved for a
cutting speed of at least 63 m/s.
• Use only clean tap water as a dust-binding agent and to cool the blade and the motor.
• The product may be operated only when connected to an electric supply and water
supply that provide an AC supply voltage, electric current rating, AC frequency, fuse
rating and water pressure in compliance with the technical specifications given on the
rating plate or in these operating instructions.
• Overhead work is permissible only when additional safety measures are implemented.
No-one is permitted underneath the saw when overhead work is undertaken.
• Before carrying out work, consult your
Hilti
sales adviser.
• Up to a maximum saw blade diameter of 650 mm, with the accessories for dry cutting
the saw can also be used for dry-cutting masonry and lightly reinforced concrete.
3.3 Possible misuse
• Do not use saw blades with a diameter greater than 1200 mm.
• Work in the correct speed range.
• Do not use the saw to cut materials which, when being worked on, can give off
hazardous and/or flammable dust or vapors.
• Work only with guide tracks connected by means of the track connector designed for
the purpose.
3.4 Items supplied DST 10-CA
Other system products approved for use with this product can be found at your
local
Hilti Store
or at:
www.hilti.group
Qty.
Designation
Qty.
Designation
1×
Saw head
1×
Saw head operating instruc-
tions
1×
Remote control unit
1×
Remote control unit operating
instructions
1×
Tool set
1×
Transport trolley
1×
Tapered connector
1×
Transport box
4×
Rail supports
1×
blade guard
DSBG80
(up to Ø 900 mm/34 in)
Summary of Contents for DST 10-CA
