18
4. Technical data
Power supply
Electric supply
Mains supply voltage:
400 V, 3–phase, 50/60 Hz
Fuse rating:
At least 16 amps, 32 amps recommended.
Generator:
Use only generators with an output of at least 40 kVA.
The generator must be earthed when in operation.
Water supply for drive and wire cooling
Cooling water:
min. 5 l/min at max. 6 bar
Compressed air for the drive (compressor)
Min. 6 bar and 100 l/min. for the drive pneumatic advance
4.1
Dimensions and weights
Drive
Dimensions
1560
×
790
×
920 mm
Weight
approx. 266 kg
4.2
Control unit
Dimensions
520
×
590
×
1080 mm
Weight
approx. 68 kg
Single-pair pulley stand
Dimensions
460
×
240
×
560 mm
Weight
approx. 23 kg
Compressor
The compressor supplied by Hilti with the equipment or any other compressor that complies with the specified
technical data may be used.
790
920
1590
520
590
1080
240
445
560
295
195
460
200
Summary of Contents for DS WS15
