![background image](http://html1.mh-extra.com/html/hilti/ds-ws15/ds-ws15_operating-instructions-manual_2136341016.webp)
16
3. Tools and accessories
DS-WSRW release pulley
Item no. 315834
Used in many applications for cutting through very thick
walls or where long cuts have to be made. The release
pulley ensures optimum wire contact length and thus a
high cutting speed.
3.4
DS-WSPW plunge pulley
Item no. 365428 / 247620
For plunge applications of all kinds. At least 2 pulleys are
required. Can also be mounted on the single-pair pulley
stand if necessary.
3.5
DS-WSVC vertical sawing device
Item no. 339312
For simple, fast cuts directly below the wire drive unit.
No further pulleys or wire guidance system is then used
(no single-pair pulley stand). The optimum solution for
applications where the drive normally stands in a hori-
zontal position. For sawing ceiling sections, supporting
beams etc.
3.6
DSW-WG wire guard
Item no. 365426
Wire guards must be fitted in situations where it can-
not be ensured that persons do not enter the danger
area while the equipment is in operation, i.e. the area
in which flying fragments etc. present a risk of injury,
or in situations where there is a risk of damage to prop-
erty or other equipment within this area.
3.7
Summary of Contents for DS WS15
