![background image](http://html.mh-extra.com/html/hilti/dcg-700-p/dcg-700-p_original-operating-instructions_2135628014.webp)
8
English
72022
*72022*
3.7
Guard with cover plate (accessory)
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the guard with cover plate.
4
Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum Ø of 7" which are approved for use at a
rotational speed of at least 8500/min and a peripheral speed of 80 m/s may be used.
The maximum grinding disc thickness is 1/4" and the maximum cutting disc thickness is 1/8".
WARNING! When cutting or slitting with cutting discs, always use the guard with cover plate.
Discs
Application
Designation
Material
Abrasive cutting disc
Cutting, slitting
ACD
Metal
Diamond cutting disc
Cutting, slitting
DCD
Mineral
Abrasive grinding disc
Rough grinding
AGD, AFD, AND
Metal
Diamond grinding disc
Rough grinding
DGCW
Mineral
Suitability of discs for the equipment used
Equipment
ACD
AG-D
AF-D
AN-D
DGCW
DCD
Guard
—
X
X
X
X
—
Guard with cover plate
X
—
—
—
—
X
Side handle
X
X
X
X
X
X
Clamping nut (not for use
with accessories with inte-
grated thread)
X
X
X
X
X
X
Clamping flange (not for
use with accessories with
integrated thread)
X
X
X
X
X
X
5
Technical data
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be 5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 120 V. The data may vary in the event of deviations from
the rated voltage and for country-specific versions. Please refer to the power tool’s rating plate for details of
its voltage, frequency, current and input power ratings.
DCG 700P
Rated current input
15 A
Rated frequency
60 Hz
Rated speed
8,500 /min
Maximum disc diameter
7 in
Weight
13.0 lb
(5.9 kg)
Drive spindle thread
5/8"-11
Thread length
3/4"
6
Preparations at the workplace
CAUTION
Risk of injury!
Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Printed: 29.03.2018 | Doc-Nr: PUB / 5164457 / 000 / 01
Summary of Contents for DCG 700-P
