![background image](http://html.mh-extra.com/html/hilti/dag-230-d/dag-230-d_operating-instructions-manual_2135606009.webp)
2.10 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain 5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.
2.11 DC‑EX 230/9" disc guard with guide carriage for cutting
2
The power tool may be used for cutting work on mineral materials only when fitted with a disc guard (dust removal
hood) and guide carriage.
CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a
suitable Hilti vacuum cleaner, are used for cutting and slitting mineral materials, such as concrete or stone. This
system serves to protect the operator and increase the life of the power tool and disc used.
2.12 Guard with cover plate
3
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use the
guard with cover plate.
3 Consumables
Discs of max. 230 mm diameter, a rotational speed of 6500/min, a peripheral speed of 80 m/sec and max. 8
mm disc thickness.
Discs
Application
Designation
Material
Abrasive cutting disc
Cutting, slitting
AC‑D
metal
Diamond cutting disc
Cutting, slitting
DC‑D
mineral
Abrasive grinding disc
Rough grinding
AG-D
metal
Assignment of discs to the equipment used
Item
Equipment
AC‑D
AG-D
DC‑D
A
Guard
-
X
X
B
Guard with cover plate
X
-
X
C
DC‑EX 230⁄9" cutting guard
-
-
X
D
Side handle
X
X
X
E
DC BG hoop grip (optional for D)
X
X
X
F
Kwik-Lock
X
X
X
en
19
Printed: 20.11.2013 | Doc-Nr: PUB / 5139473 / 000 / 01