End-of-line programming
60/70
Parameter
Description
Values
Example
size
-l <value>
Length (number of bytes) of
the area to be read or
erased.
Must be ≤ flash device size
Note
: When size is specified as
0xffffffff
, the flasher uses the
detected size of the flash device.
-l 0xFA0
file
*.*
If used in a
flash
command:
Name of the file or binary to
be written to the specified
flash destination.
Note
: The file must be
available in the directory of
the flasher tool; otherwise
you have to specify the path
to the location of the file.
Example:
firmware.nxi
If used in a
read
command:
Name of the output file in
which you want to store
data read from the specified
flash.
Note
: The file will be
automatically created or, if it
already exists, overwritten.
Example:
flash_backup.bin
Table 28: Flasher parameters and values
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public
© Hilscher 2019
