hilscher netX 90, Production Manual

Page: 47 / 70

End-of-line programming 47/70
3 End-of-line programming
3.1 Programming interface options
3.1.1 Overview
The following table provides an overview of the firmware programming
options for the netX 90.
Interface Processed on
netX by Physical connection Programming/flasher
tool See section
Serial
(UART) ROM code in
console mode
· UART-to-USB adapter
(FTDI bridge) connected to
PC/laptop
· UART-to-RS232 adapter
connected to PC/laptop
· Flasher tool of netX
Studio CDT on PC/
laptop
· Command line flasher
on PC/laptop
Note : Not yet supported
by the Flasher
Using console mode and
serial/UART
interface
[
}
page 48]
Standard
Ethernet ROM code in
console mode via
built-in 2-port
standard Ethernet
switch RJ45 port 0 or port 1
connected to PC/laptop via
Ethernet
· Flasher tool of netX
Studio CDT on PC/
laptop
· Command line flasher
on PC/laptop
Note : Not yet supported
by the Flasher
Using console mode and
“standard”
Ethernet
[
}
page 49]
ROM code in
console mode via
built-in web server RJ45 port 0 or port 1
connected to PC/laptop via
Ethernet Standard web browser on
PC/laptop Using console mode and
integrated web
server
[
}
page 50]
Debug
interface JTAG/SWD JTAG-to-USB adapter (FTDI
bridge) connected to PC/
laptop
· Flasher tool of netX
Studio CDT on PC/
laptop
· Command line flasher
on PC/laptop
Using debug interface
(JTAG/SWD)
[ } page 54]
Third party tools connected
to PC/laptop E.g.:
·
TRACE32
®
( www.lauterbach.com )
·
iC5700
(
www.isystem.com )
·
UDE
®
( www.pls-mc.com )
Host
interface ROM code in
console mode netX 90 connected to the
host application of the netX
OEM device via DPM or
SPM Host application (e.g.
based on cifX Toolkit)
Note : This option is not
yet supported
Using console mode and
host interface
[
}
page 55]
Table 25: Programming options and interfaces
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public © Hilscher 2019