Device Drawings and Connections
24/86
netTAP NT 50 | Gateway Devices
DOC091202UM09EN | Revision 9 | English | 2013-02 | Released | Public
© Hilscher, 2010-2013
4.2
Positions of LEDs and Control Elements
Meaning of the elements
Connector X1 for power supply
SYS-LED
APL-LED
COM-LED
LED, depends on protocol at X2
LED, depends on protocol at X2
Rotary address switch, factor 10
Rotary address switch, factor 1
The address switches can be activated with
SYCON.net version 1.351 (or higher) and can
be used with firmware version 1.1 (or higher)
for PROFIBUS DP Slave, DeviceNet Slave,
CANopen Slave and CC-Link Slave.
Section
Range of Values for the Address Swit-
on this page lists the range of values for
each protocol.
LED, green, LINK at X3
LED, yellow, ACT respectively Rx/Tx
(activity) at X3
Figure 3: LEDs and Control Elements
4.2.1
Range of Values for the Address Switches
Protocol
Valid range of values
PROFIBUS DP Slave
0 … 99 (station address)
DeviceNet Slave
0 … 63 (MAC ID)
CANopen Slave
0 … 99 (Node ID)
Protocol
Valid range of values
Number of Stations
1 … 64
1
1 … 63
2
1 … 62
3
CC-Link Slave
1 … 61
4
The number of stati-
ons depends on the
configuration
Figure 4: Range of Values for the Address Switches
