First Project
57/142
netPLC C100 | Startup Guide
DOC090701UM02EN | Revision 2 | English | 2009-10 | Released | Public
© Hilscher, 2009
8 First Project
8.1 Overview
This section describes how a project is created for the slot PLC. It is
assumed that the hardware (slot PLC) and software already is installed.
Additionally a PROFIBUS-DP slave device and a PROFIBUS cable are
needed.
If the project is loaded via USB into the slot PLC, then a USB cable with
type A to type mini B is needed.
An important note in advance:
Important:
The name of the application has to be reduced. The name of
the application can have 7 characters as maximum. The target device
supports the MS-DOS file format 8.3 and no long file names. Application
names with more than 7 characters can not be started in the target device.
The eights character is used internally and therefore is reserved.